Lesson 4 Basic Configuration of Interconnected Sites

Basic configuration of interconnected sites

In this model: PC9 belongs to site2 and PC10 belongs to site 3

Target: PC9 and PC10 ping each other

After adding vedges to vmanage in the previous article, we configured it as follows:

Edge 1:

VPN 10

Interface ge0/3

Description of PC9

IP address 10.1.9.1/24

Do not shut down

!

OP

Advertisement is connected ##Notify the network part between PC9-vedge1 to core sdwan

Edge 2:

VPN 10

Interface ge0/3

Description of PC9

IP address 10.1.10.1/24

Do not shut down

!

OP

Advertisement is connected ##Notify the network part between PC10-vedge2 to core sdwan

Configuration on PC9 and PC10:

We can set the IP via each edge and point to the default gateway

Check the learning path for each edge:

=========

We can then test the ping between PC9 and PC10

=========

In the next lesson we will perform the configuration on vmanage’s webgui instead of using the CLI