Palo Alto subinterface configuration

Configuring the Palo Alto subinterface

Model:

Switch part:

Firewall section:

– Create subinterfaces 100 and 200

The same is true for vlan 200, and then try to ping the 2 vlans to each other

R4#ping 10.2.2.100
Enter an escape sequence to abort.
Send 5 100-byte ICMP Echos to 10.2.2.100 with a timeout of 2 seconds:
!!!!
100% success rate (5/5), round trip min/avg/max = 1/1/3 ms
R4#

R5#ping 10.1.2.100
Enter an escape sequence to abort.
Send 5 100-byte ICMP Echos to 10.1.2.100 with a timeout of 2 seconds:
!!!!
100% success rate (5/5), round trip min/avg/max = 2/3/5 ms
R5#